INDUSTRIAL BLENDERS


INDUSTRIAL BLENDERS

Our company develops Industrial Blenders, which are widely installed for blending two or more chemicals. These are constructed from prime quality stainless steel that provides robustness and durability to the machine. It is available in various standard capacities and can be customized in different configurations as per the demands of our clients.














Double Cone Blender

The Double cone blender is an efficient and versatile machine to mix dry powder and granules homogeneously and widely used for pharmaceutical. Food, chemical and cosmetic products etc.
It consists of a cylindrical shell with two conical frustum with opening for charging and discharging. Butterfly valve is provided for discharge. The vessel is mounted on a sturdy stand with bearing blocks and driven through a gearbox coupled with motor.
The machine is provided with control panel board and safety railing. All joints are organ arc welded, ground and polished to mirror finish from inside and matt finish from outside.

Features :

1.The conical shape of both ends enables uniform mixing and easy discharge.
2.All contact parts are out of SS 304 or SS 316 quality material, as required by customer.
3.Maximum care has been taken to ensure safe operation of the unit.
4.Manual rotating facility with hand wheel for inching. The same will be provided with SS cover and limit switch (In 200 kg and above model).
5.Two no's of safety rods will be provided at back side(One left side and one right side)
6.Suitable size of butterfly valve at one end of the cone provided for material discharge and hole with openable cover provided at other end of the cone for material charging and cleaning.
7.One shaft with 04 no's of fixed buffel with mirror polish provided inside the cone.
8.Cone will be mirror polished from the inside and outside and structure will be matt polished.
9.All moving parts are covered with SS 304 covers.
10.Safety guards are made for SS 304 pipes provided in front of the m/c with limit switch Panel fabricated from SS 304 material with facility of three phase indication, DOL starter, digital timer and Amp. Mete.r
11.As per customer requirement, machine will be provided with left side drive or with right side drive Worm reduction gearbox used for speed reduction.
12.Food grade rubber gasket will be used on both ends of cone as well as in butterfly valve.
13.50 Ltrs, 100 Ltrs, 150 Ltrs, 200 Ltrs, 250 Ltrs , 300 Ltrs, 350 Ltrs, 400 Ltrs, 500 Ltrs, 600 Ltrs, 700 Ltrs, 750 Ltrs, 800 Ltrs, 1000 Ltrs, 1200 , Ltrs 1500 Ltrs, 1600 Ltrs, 1700 Ltrs, 2000 Ltrs, 2300 Ltrs, 2500 Ltrs, 2700 Ltrs, 3000 Ltrs, 3500 Ltrs, 4000 Ltrs, 4500 Ltrs, 5000 Ltrs.
14.Available in GMP model and NGMP model. SS 316, SS 304 and MS.

Octagonal Blender

The Octagonal Blender is an efficient and versatile blending machine for mixing and lubrication process of dry granules and powder homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. The Octagonal blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.
It is a very useful machinery for pharmaceutical industry, where in gentle blending of dry granules or powder is to be done. It consists of octagon shaped body, rectangular central portion and top and bottom polygonal frustum.
It is provided with baffles for fast and efficient mixing, charging port and outlet with butterfly valve.
The entire unit is mounted on a sturdy stand, complete with electric motor and gearbox. It can be supplied with bin charging system and can be designed for vacuum for dust free charging and discharging of product (Optional). The machine is provided with control panel board and safety railing.

Features :

1.Suitable for dry mixing of products in granule form.
2.Easy for loading and unloading of material.
3.Easy for cleaning
4.All contact parts are made out of SS 304/SS 316 or SS 316 L quality materials, as per customer requirement.
5.The octagonal shape and slow speed of rotating gives sufficient continuous movement to the granules, resulting in good quality.
6.Simple design requires minimum maintenance.
7.General structure and safety guards made out of mild steel and colored in standard model and made out of SS 304 and polished to the matt finish in GMP model.
8.Maximum care has been taken to ensure safe operation of the unit.
9.Manual rotating facility with hand wheel for inching.
10.Bigger size batch at low power consumption.
11.It is a slow speed blender and has a removable baffle mounted through a rectangular openable lid
11.50 Ltrs, 100 Ltrs, 150 Ltrs, 200 Ltrs, 250 Ltrs , 300 Ltrs, 350 Ltrs, 400 Ltrs, 500 Ltrs, 600 Ltrs, 700 Ltrs, 750 Ltrs, 800 Ltrs, 1000 Ltrs, 1200 , Ltrs 1500 Ltrs, 1600 Ltrs, 1700 Ltrs, 2000 Ltrs, 2300 Ltrs, 2500 Ltrs, 2700 Ltrs, 3000 Ltrs, 3500 Ltrs, 4000 Ltrs, 4500 Ltrs, 5000 Ltrs.
12.Available in GMP model and NGMP model. SS 316, SS 304 and MS.

Ribbon Blender

The Ribbon Blender is an efficient and versatile blending machine for mixing and lubrication process of dry granules and powder homogeneously. Approximately, two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon blender gives best result for granules due to design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.
Material should be charged from the top. There are port/ports provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom and at centre of the container. The discharge height can be adjusted as per the requirement. Material gets discharged in the other container directly, so that material handling time for discharge is nil and the operation is dust free.
In Ribbon blender, the powder moves from centre to the end of container and end of container to the centre of container. Hence requirement of total mixing time is very less and the RPM required are also very less.

The dry material gets sufficient continuous movement due to the shape and movement of ribbon and shape of the container, which moves material for good quality of blending.

The unit consists of one electrical motor, one warm reduction gear, belt drive between motor and gear, couple drive between gears to ribbon mixing stirrer. Container having four no.of legs with discharge valve and top cover. Both ends of mixing shaft are sealed with bush and PTFE gland housing and safety guards are provided on all moving parts. 

 

Features :

  • 1.The shape of container and mixing stirrer gives sufficient continuous movement to the powder/granules, resulting in good quality
  • 2.All contact parts are made out of SS 304/SS 316 or SS 316 L quality materials
  • 3.Maximum care has been taken to ensure safe operation of the unit
  • 4.Inching facility for stirrer for discharge of material
  • 5.Full cover on top side of the container
  • 6.Discharge height can be adjusted, if confirm with the order
  • 7.Operating panel provided for safe operation of blender
  • 8.Centrally located material discharge valve(Butterfly/Sliding Valve)
  • 9.Dust proof top cover with window provided
  • 10.General structure completely made out of mild steel and painted in standard model and the same is cladded with SS 304 in GMP model
  • 11.Safety guards and covers made out of SS 304 in GMP model and made out of mild steel in standard model
  • 12.Legs made out of MS and painted in standard model and same will be cladded with SS 304 in GMP model

13.50 Ltrs, 100 Ltrs, 150 Ltrs, 200 Ltrs, 250 Ltrs , 300 Ltrs, 350 Ltrs, 400 Ltrs, 500 Ltrs, 600 Ltrs, 700 Ltrs, 750 Ltrs, 800 Ltrs, 1000 Ltrs, 1200 , Ltrs 1500 Ltrs, 1600 Ltrs, 1700 Ltrs, 2000 Ltrs, 2300 Ltrs, 2500 Ltrs, 2700 Ltrs, 3000 Ltrs, 3500 Ltrs, 4000 Ltrs, 4500 Ltrs, 5000 Ltrs. 

Available in GMP model and NGMP model. SS 316, SS 304 and MS.

 





 
  •  Plot No. 799, Phase 5, IDA,
    Jeedimetla, Dulapally Road,
    Near Stell City, Hyderabad - 500055,
    Andhra Pradesh, India
    Phone: +(91)-9440010856|
    +(91)-9705000059
    Landline: +(91)-(40)-65145126
    FAX: +(91)-(40)-65145126
    E-mail: globalengineering.net.in

Latest Products

Filters
Chemical Exchangers
Storage Tanks
Heat Exchangers
Mixing Vessels
Transpotation Tanks 

Photo Gallery